Dig Clinotronic W/Cal Kit Case

Be the first to review this product

1 / EA

Lead Time

16 Day(s)

SKU

CPEW-97604-15-EA

MFRPN

546356010

DIG CLINOTRONIC W/CAL KIT

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Details

Use to set and check angles through 360. Used in industries such as machine tools, general engineering, shipbuilding, textile machinery, structural , mining & aeronautical, etc. Simple to operate. For the initial setting, i.e., to the nearest degree, depress the spring loaded micrometer drum to disengauge the drive to the main scale. Coarse setting is then made by rotating the spirit level by hand. Re-engauge drive and rotate micrometer drum to obtain final setting. FEATURES

Range of 45, capacity of 0-360. Resolution of 0.01 (selectable)
Display: use any units common to inclination measurements
Desired units selected by push button. Automatic setting of zero and absolute or relative measuring mode selected by push button
Built-in calibration program
Interface connection RS232 is integrated. Special purpose cables available
Low battery indication
Response time -value within 5 seconds
Sensitivity: Depending on units set- .01
Repeatability: <.01. Linearitywithin 3 min. of arc. Temp. coefficient-less than 0.01&Deg;/&Deg;C
Battery: Thionylchlorid-lithium, half AA size .57 x .96"/14.5 x 24.5mm, 3.6 volt
Housing: aluminum hard anodized or PPS-50% glass contained
Dimensions 4 x 3 x 1"
Weight 13 oz.
Temp. range-operational -0 to 50C

More Information